"The Mopar '11 Charger takes the 'head- turning' factor up a few notches," said Pietro Gorlier, President and CEO of Mopar, Chrysler Group's service, parts and customer-care brand. "By adding some of the most distinctive accessories to an already strong performer, we've created a special-edition car for enthusiasts."
Powered by the legendary 5.7-liter HEMI® with 370 horsepower and 395 lb.-ft. of torque, the specially equipped Charger includes the "Super Trac Pac" option that pushes the capabilities of the Dodge Charger Mopar in acceleration, handling and braking. Already powerful, the 5.7-liter has been tuned to extract the maximum amount of torque from the engine with the inclusion of a specially calibrated engine controller. The controller matches maximum engine power and transmission shifting to the differential for the 2011 Dodge Charger Mopar.
Backed with a proven five-speed W5A580 automatic, Mopar aficionados will appreciate the latest generation "Pistol Grip" shifter combined with Auto Stick. With Auto Stick, drivers may select a higher or lower gear while the transmission controller helps prevent the possibility of an over-rev condition. At the rear, the differential has been boosted up with a new 3.91:1 final-drive ratio for enhanced acceleration - unique to the Dodge Charger Mopar. Initial testing of the Mopar '11 Charger has shown 0-to-60 mph blasts in the low five-second range.
Enhancements to the chassis include adding larger front 30mm solid stabilizer bar and rear 20mm solid stabilizer bar, increases from 27mm and 16mm (respectively). Adding to the overall stability and handling of the Dodge Charger Mopar are cross-car braces located at both the front and rear shock towers. For increased luggage space, the rear tower-to-tower brace may be easily removed.
Specific-design, 20-inch x 8-inch Envy wheels are fitted with Goodyear F1 Supercar 245/45ZR20 tires at all four corners. Wheels are a five-spoke design with a 45mm offset, include specific Mopar center caps and are finished in a high-gloss black complementing the overall "Pitch Black" exterior finish of the Dodge Charger Mopar.
Excellent stopping power is provided through vented rotors measuring 345mm x 28mm up front that are fitted with dual-piston, sliding calipers. At the rear, vented rotors measuring 320mm x 22mm, coupled with single-piston calipers are used.
Share this post!